BOOM LIFTS

BOOM LIFT 65' STICK 4x4 W/ 5'JIB


	Image for reference only Actual item may look different Click on image for larger view Click on above thumbnails for alternate view

Daily: $499.50

Weekly: $1,508.50

Monthly: $3,485.50

Quantity: for a period of
day(s) week(s) month(s)

Additional Information

DESCRIPTION
A 65 ft rough-terrain stick boom lift with jib for high-reach outdoor access, construction, industrial maintenance, structural work, and exterior building projects. The fleet includes models such as the JLG 660SJ, MEC 65-J, and Genie S-65, with working heights around 71 ft, strong horizontal reach, 500 lb platform capacity, and diesel-powered rough-terrain performance. The straight boom design provides long outreach, while the jib improves final platform positioning near the work area. Commonly rented by contractors for commercial construction, envelope work, steel access, signage, and large exterior maintenance projects throughout the Lower Mainland.
JLG
Model: 660SJ
Boom, Bucket, Loader, Platform, and Stick:
Horizontal Reach: 56.75 in
Maximum Platform Capacity: 500.0 lbs
Maximum Platform Height: 66.67 in
Number of Boom Sections: 3.0
Platform Rotation: 180.0 degrees
Platform Size: 36 X 96 in
Swing: 360.0 degrees
Drive:
Drive: 2WD
Travel Speed (Lowered): 4.25 mph
Engine:
Emissions Tier: Tier 4 Final
Engine: Vortec 3000 MPFI
Engine Manufacturer: GM
Horsepower: 82.0 hp
Power Mode: Hybrid
Fluid Capacities:
Fuel Tank Capacity: 40.0 gal
Hydraulic Tank Capacity: 32.0 gal
Performance:
Gradeability: 30.0 percent
Weights & Dimensions:
Axle Oscillation: 8.0 in
Ground Clearance: 9.625 in
Inside Turning Radius: 91.5 in
Operating Weight: 26650.0 lbs
Outside Turning Radius: 210.0 in
Overall Width: 98.0 in
Stowed Height: 101.0 in
Stowed Length: 402.0 in
Tailswing: 45.0 in
Wheelbase: 97.5 in
Wheels & Tires:
Tire Size: 39 X 15 X 2.25
Click here for JLG Operators Manual
MEC
Model 65-J Straight Boom
Heights:
Working Height* 71 ft.* 21.6 m*
Platform Height 65 ft. 19.8 m
Drive Height 65 ft. 19.8 m
Maximum Outreach 47 ft. 14.3 m
Turntable Swing 360 Continuous
Jib Range of Motion 135
Platform Rotation 180 (90 each side)
Platform:
Total Lift Capacity Size & Capacity 500 lbs. 227 kg
Personnel Capacity 2
Platform Width 90 in. 2.3 m
Platform Depth 40 in. 1.0 m
Platform Entry 1 End Swing Gate, 2 Slide Bars
Dimensions:
Length-Stowed (Overall) 30 ft. 9.1 m
Width 98 in. 2.5 m
Overall Height 100 in. 2.5 m
Tailswing 51 in. 1.3 m
Weight** (Approximately) 19,850 lbs.** 9,000 kg**
Working Conditions:
Drive 4 Wheel Drive
Gradeability 45%
Ground Clearance 12 in. 30.5 cm
Breakover Angle 22
Axle Oscillation 20 ( 10 )
Tires Solid Rough Terrain
Power 50 HP Kubota Tier 4 Final
Power Source:
Fuel Capacity 32 gal. 121 L
Hydraulic Oil Capacity 40 gal. 151 L
Movement:
Turning Radius (Inside) 78 in. 1.9 m
Drive Speed 4 mph 6.4 kph
Boom Lift Speed 55 Seconds
Boom Extend Speed 25 Seconds
Jib Lift Speed 20 Seconds
Important - MEC lifts must be on a hard level surface while elevated.
Meets or exceeds the requirements of ANSI A92.20 and CSA B354.6.
Specifications subject to change without notice. Contact your MEC distributor for detailed instructions on the proper use and maintenance of this equipment.
Click here for MEC Operators Manual
Genie
Model: S65
Working Height: 71 ft (21.64 m)
Platform Height: 65 ft (19.81 m)
Horizontal Reach: 56 ft 2 in (17.12 m)
Platform Capacity: 500 lbs (227 kg)
Platform Rotation: 160
Turntable Rotation: 360 continuous
Power Source: Diesel
Drive: 4WD
Tires: Foam-filled (or RT-Lug, depending on the unit)
Gradeability: 45%
Travel Speed: 3.7 mph (5.95 km/h)
FAQ
Q: What is a 65 ft stick boom lift used for?
A: It is used for high-reach outdoor work where long horizontal outreach and direct elevated access are required.
Q: Why choose a stick boom instead of an articulated boom?
A: A stick boom is preferred when the job requires longer direct outreach, while an articulated boom is better for reaching over obstacles.
Q: Does this boom lift have a jib?
A: Yes this category includes 65 ft stick boom units with jib options for improved platform positioning.